Build Slicer3 on Dell Laptop Inspiron 1501 (Fedora Core 6)
From NAMIC Wiki
Home < Build Slicer3 on Dell Laptop Inspiron 1501 (Fedora Core 6)
If Fedora Core 6 has been installed on Dell Laptop Inspiron 1501, follow these steps to build Slicer3 on it:
Contents
Install Tcl/Tk
- If you don't have Tcl/Tk installed, download and install it from here:
http://downloads.activestate.com/ActiveTcl/Linux/8.4.14/ActiveTcl8.4.14.0.272572-linux-ix86.tar.gz
- Login as root and install Tcl/Tk
Get Slicer3 source code
svn co http://www.na-mic.org/svn/Slicer3/branches/IGT Slicer3
[Optional] Include opentracker in Slicer3 (e.g. for IGT Demo module)
With SPLOT built, locate the OpenTracker section in Slicer3/CMakeLists.txt and perform the following changes:
- Change this line
OPTION(USE_OPENTRACKER "Need OpenTr acker lib to build IGT Demo module." OFF)
to
OPTION(USE_OPENTRACKER "Need OpenTracker lib to build IGT Demo module." ON)
- Find this part
FIND_LIBRARY(OPENTRACKER_LIB NAMES opentrackerd opentracker PATHS "" )
then change it to
FIND_LIBRARY(OPENTRACKER_LIB NAMES opentrackerd opentracker PATHS "The directory contains the opentracker lib" # e.g. /home/surg/projects/splot-build/opentracker/lib )
- Find this part
FIND_PATH(OPENTRACKER_INC_DIR "OpenTracker/OpenTracker.h" "" )
then change it to
FIND_PATH(OPENTRACKER_INC_DIR "OpenTracker/OpenTracker.h" "The opentracker include directory" # e.g. /home/surg/projects/splot-build/opentracker/include )
Build Slicer3
./Slicer3/Scripts/getbuildtest.tcl
Run Slicer3
./Slicer3-build/bin/Slicer3