Difference between revisions of "2011 Summer Project Week Patient Mounted Robot"

From NAMIC Wiki
Jump to: navigation, search
 
(32 intermediate revisions by 5 users not shown)
Line 1: Line 1:
= Template Project Name Goes Here =
+
__NOTOC__
 +
<gallery>
 +
Image:PW-MIT2011.png|[[2011_Summer_Project_Week#Projects|Projects List]]
 +
Image:YourPictureHere.png|Your caption here
 +
</gallery>
 +
= Key Investigators =
  
Back to [[NA-MIC_Collaborations|NA-MIC_Collaborations]], [[Algorithm:Site1|Site1 Algorithms]], [[Algorithm:Site2|Site2 DBP]]
+
* Massachusetts General Hospital: Conor James Walsh, Maryam Shokri
  
'''Objectives'''
+
* MIT: Faye Wu
  
Objectives and descriptions go here.  The details given in this Template Project page represent the minimal amount of information that should be included for each project.  By housing all of the Project information on a single page, Wiki maintanence is reduced.  Now we can link to this page from several other places in the Wiki, such as each site's Site Page, the NA-MIC Collaborations page, Project Week pages, and from the externally visible NA-MIC webpage.
+
<div style="margin: 20px;">
 +
<div style="width: 27%; float: left; padding-right: 3%;">
  
'''Progress'''
+
<h3>Objective</h3>
 +
The goal of this project is to port existing robot control software for Robopsy and integrate it into 3D slicer using OpenIGTLink.
  
Put your project status and any other bulk information here.  Remember that beautiful images are key!
+
</div>
  
''Sub Heading''
+
<div style="width: 27%; float: left; padding-right: 3%;">
  
Put sub-headings in double apostrophes.  Always include a sub-heading under the '''Progress''' section for ''References'' (as shown below).  This is where you list any of your publications on this project and/or correlated/collaborative publications.
+
<h3>Approach, Plan</h3>
  
''References''
+
The method performs robot/image registration using fiducial markers and robot control. The following modifications will be performed:
  
* Reference 1.
+
* The controller code will be modified and connected to the OpenIGTLink.
* Reference 2.
 
  
http://www.na-mic.org/Special:Publications?text=005149+melonakos+segmentation&submit=Search&words=all&title=checked&keywords=checked&authors=checked&abstract=checked&sponsors=checked&searchbytag=checked
+
* The module will be modified to add widgets for performing the registration and robot control tasks.
  
'''Key Investigators'''
+
</div>
  
* Site1: Person 1, Person 2, Person 3
+
<div style="width: 40%; float: left;">
* Site2: Person 1
 
* Site3: Person 1, Person 2, Person 3, Person 4
 
  
'''Links'''
+
<h3>Progress</h3>
  
* Link1
+
* Have used Skeleton Generator to generate template code for 3D Slicer module to collect fiducials. The registration algorithm was modified. The location of each fiducial marker on the robot was determined. The registration algorithm employs the position of markers on the robot and the fiducial positions which are collected from the image. The initial position for the needle holder was determined for the registration. The possibilities of adding GUI widgets to the registration module in the 3D slicer were discussed with collaborators.
* Link2
 
  
Project Week Results: [[blah|Jan 2006]], [[blah|Jun 2007]]
+
* Discussed employing of other available modules like segmentation in our module for generating semi-automatic registration technique. This technique incorporates user feedback and image segmentation for more accurate registration.
 +
 
 +
* Installed the controller software on Linux and modified the C++ code to send the commands to the robot.
 +
 
 +
* Discussed connecting the controller to the 3D slicer using OpenIGTLink.
 +
 
 +
* IGTLoadableModules will be employed to integrate the controller code.
 +
 
 +
</div>
 +
</div>
 +
 
 +
<div style="width: 97%; float: left;">

Latest revision as of 15:17, 25 June 2011

Home < 2011 Summer Project Week Patient Mounted Robot

Key Investigators

  • Massachusetts General Hospital: Conor James Walsh, Maryam Shokri
  • MIT: Faye Wu

Objective

The goal of this project is to port existing robot control software for Robopsy and integrate it into 3D slicer using OpenIGTLink.

Approach, Plan

The method performs robot/image registration using fiducial markers and robot control. The following modifications will be performed:

  • The controller code will be modified and connected to the OpenIGTLink.
  • The module will be modified to add widgets for performing the registration and robot control tasks.

Progress

  • Have used Skeleton Generator to generate template code for 3D Slicer module to collect fiducials. The registration algorithm was modified. The location of each fiducial marker on the robot was determined. The registration algorithm employs the position of markers on the robot and the fiducial positions which are collected from the image. The initial position for the needle holder was determined for the registration. The possibilities of adding GUI widgets to the registration module in the 3D slicer were discussed with collaborators.
  • Discussed employing of other available modules like segmentation in our module for generating semi-automatic registration technique. This technique incorporates user feedback and image segmentation for more accurate registration.
  • Installed the controller software on Linux and modified the C++ code to send the commands to the robot.
  • Discussed connecting the controller to the 3D slicer using OpenIGTLink.
  • IGTLoadableModules will be employed to integrate the controller code.