Difference between revisions of "2012 Summer Project Week Breakout Session:Ultrasound"

From NAMIC Wiki
Jump to: navigation, search
(Created page with ' =Topics= # Improving Ultrasound imaging. This involves acquiring RF level or other data from the mid-processor stage of the imager (see http://www.ti.com/lit/wp/sprab12/sprab1…')
 
Line 1: Line 1:
 
+
=Topic suggestions=
=Topics=
 
  
 
# Improving Ultrasound imaging.  This involves acquiring RF level or other data from the mid-processor stage of the imager (see http://www.ti.com/lit/wp/sprab12/sprab12.pdf, Figure 2) with the intent to provide a more suitable image for  a particular application.
 
# Improving Ultrasound imaging.  This involves acquiring RF level or other data from the mid-processor stage of the imager (see http://www.ti.com/lit/wp/sprab12/sprab12.pdf, Figure 2) with the intent to provide a more suitable image for  a particular application.

Revision as of 21:14, 9 June 2012

Home < 2012 Summer Project Week Breakout Session:Ultrasound

Topic suggestions

  1. Improving Ultrasound imaging. This involves acquiring RF level or other data from the mid-processor stage of the imager (see http://www.ti.com/lit/wp/sprab12/sprab12.pdf, Figure 2) with the intent to provide a more suitable image for a particular application.
  2. Ultrasound post-processing, in which the image is processed to better enable, for example, registration to a CT data set.
  3. Calibration, registration and display of ultrasound in 3D Slicer
  4. Real time (lag free) display of high quality US in Slicer for procedure guidance and lag free registered display in 3D models.
  5. The combination of 3 and 4 on low cost commodity hardware.
  6. The capture of all data to enable post procedure replay of a experimental or clinical session, so that the various processing steps can be debugged and optimized.