Difference between revisions of "5DOF Electromagnetic Tracker Notes"

From NAMIC Wiki
Jump to: navigation, search
(Notes on differences between 5DOF and 6DOF trackers)
 
(2. changed "plane of the array" to "plane of the single coil".)
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
5DOF (five-degree-of-freedom) electromagnetic trackers track a single dipole coil against a spread-out array of coils. Because the single coil is symmetrical about its axis, orientation roll about the single coil's axis cannot be tracked. Orientation latitude and longitude can be tracked, as can X Y Z position.
+
5DOF (five-degree-of-freedom) electromagnetic trackers track a single dipole coil receiver against a spread-out array of transmitter coils. Because the single coil is symmetrical about its axis, orientation roll about the single coil's axis cannot be tracked. Orientation latitude and longitude can be tracked, as can X Y Z position.
  
The single does not need to be characterized, as long as the coil is small enough to be a dipole, as the coil's gain is tracked as part of the position-and-orientation algorithm.
+
The single receiver coil does not need to be characterized, as long as the coil is small enough to be a dipole, as the coil's gain is tracked as part of the position-and-orientation algorithm.
 +
 
 +
The single coil can be used as a transmitter, and the array as receivers, though it can be difficult to get enough signal.
 +
 
 +
There are many choices for the spread-out array:
 +
 
 +
1. Six or more coils pointed in various directions. Any particular arrangement needs to be analyzed and simulated for trackability.
 +
 
 +
2. Twelve coils in a field-and-gradient array. Think of the single coil as a transmitter. The twelve-coil array then measures the field and gradient from the single coil. By electromagnetic reciprocity, single coil as receiver works the same. There is a direct analytic solution for position using this array. One problem is that the gradient matrix is singular when the array is in the equatorial plane of the single coil. See the following paper for discussion and workarounds:
 +
 
 +
*[[http://scitation.aip.org/content/aip/journal/jap/115/17/10.1063/1.4861675 | Nara etal, "Moore-Penrose generalized inverse of the gradient tensor in Euler's equation for locating a magnetic dipole"]][[http://dx.doi.org/10.1063/1.4861675 | J. Appl. Phys. 115, 17E504 (2014)]] on field-and-gradient single-coil 5DOF tracking closed-form algorithm.
 +
 
 +
3. Array of spiral coils on a printed-circuit board. This has the advantage of precisely-known locations of coil turns.
 +
 
 +
As mentioned above, the 5DOF tracker has an unmeasurable degree of freedom, single-coil roll. If the tracking algorithm is calculated in the coordinate system of the single-coil receiver, the unmeasurable degree of freedom is explicitly present, and its effects can be evaluated when converting from receiver coordinates to transmitter coordinates. If the tracking algorithm is calculated directly in the transmitter coordinates, the unmeasurable degree of freedom is hidden, and its effects can come as a surprise (as discussed in 2. above).

Latest revision as of 13:06, 13 October 2022

Home < 5DOF Electromagnetic Tracker Notes

5DOF (five-degree-of-freedom) electromagnetic trackers track a single dipole coil receiver against a spread-out array of transmitter coils. Because the single coil is symmetrical about its axis, orientation roll about the single coil's axis cannot be tracked. Orientation latitude and longitude can be tracked, as can X Y Z position.

The single receiver coil does not need to be characterized, as long as the coil is small enough to be a dipole, as the coil's gain is tracked as part of the position-and-orientation algorithm.

The single coil can be used as a transmitter, and the array as receivers, though it can be difficult to get enough signal.

There are many choices for the spread-out array:

1. Six or more coils pointed in various directions. Any particular arrangement needs to be analyzed and simulated for trackability.

2. Twelve coils in a field-and-gradient array. Think of the single coil as a transmitter. The twelve-coil array then measures the field and gradient from the single coil. By electromagnetic reciprocity, single coil as receiver works the same. There is a direct analytic solution for position using this array. One problem is that the gradient matrix is singular when the array is in the equatorial plane of the single coil. See the following paper for discussion and workarounds:

3. Array of spiral coils on a printed-circuit board. This has the advantage of precisely-known locations of coil turns.

As mentioned above, the 5DOF tracker has an unmeasurable degree of freedom, single-coil roll. If the tracking algorithm is calculated in the coordinate system of the single-coil receiver, the unmeasurable degree of freedom is explicitly present, and its effects can be evaluated when converting from receiver coordinates to transmitter coordinates. If the tracking algorithm is calculated directly in the transmitter coordinates, the unmeasurable degree of freedom is hidden, and its effects can come as a surprise (as discussed in 2. above).