Difference between revisions of "Algorithm:UNC:DTI"

From NAMIC Wiki
Jump to: navigation, search
(fixup publications)
(Updated tract analysis section with flowchart)
Line 1: Line 1:
 
= Quantitative Tract Analysis =
 
= Quantitative Tract Analysis =
Tractography has commonly been used to visualize the geometry of fiber tract bundles.  The aim of this project is to use tractography as a reference coordinate system for doing fiber tract statistics along a bundle.
+
This project proposes a framework for quantitative analysis of DTI data.  The framework uses the full tensor information for statistical analysis using the affine-invariant Riemannian metric for defining operations such as interpolation and averaging on tensors.  Furtheremore, the results of tractography are used to provide a reference coordinate system the respresents the underlying structure of fiber bundles.  The tract modeling framework includes a model both of the geometry of the fiber bundle and of the diffusion properties along the bundle.  A new anisotropy measure called geodesic anisotropy (GA) is also included in the framework.
[[image:corouge_dti_statistics.jpg|thumb|Fiber tracts with colored FA attributes]]
+
[[image:corouge_dti_statistics.jpg|thumb|320px|Fiber tracts with colored FA attributes]]
 +
 
 +
[[image:corouge-tract-analysis-flowchart.jpg|550px]]
  
 
= Population Analysis =
 
= Population Analysis =
Line 25: Line 27:
  
 
= Publications =
 
= Publications =
* Isabelle Corouge, P.Thomas Fletcher, Sarang Joshi, Sylvain Gouttard, Guido Gerig, Fiber Tract-Oriented Statistics for Quantitative Diffusion Tensor MRI Analysis.  Medical Image Analysis 10 (2006), 786 - 798 [http://www.cs.unc.edu/~gerig/publications/Corouge-DTI-Original-MedIA-2006.pdf| PDF]
+
* Corouge I, Fletcher PT, Joshi S, Gouttard S, Gerig G, Fiber Tract-Oriented Statistics for Quantitative Diffusion Tensor MRI Analysis.  Medical Image Analysis 10 (2006), 786 - 798 [http://www.cs.unc.edu/~gerig/publications/Corouge-DTI-Original-MedIA-2006.pdf| PDF]
 
* Goodlett C, Corouge I, Jomier M, Gerig G. [http://hdl.handle.net/1926/39 A Quantitative DTI Fiber Tract Analysis Suite]. Insight Journal, 2005.
 
* Goodlett C, Corouge I, Jomier M, Gerig G. [http://hdl.handle.net/1926/39 A Quantitative DTI Fiber Tract Analysis Suite]. Insight Journal, 2005.
 
* Corouge I, Fletcher PT, Joshi S, Gilmore JH, Gerig G. [[Media:Corouge-miccai-2005.pdf| Fiber Tract-Oriented Statistics for Quantitative Diffusion Tensor MRI Analysis.]] Proc. MICCAI, Oct 26-29 2005; LNCS 3749, pp. 131-139
 
* Corouge I, Fletcher PT, Joshi S, Gilmore JH, Gerig G. [[Media:Corouge-miccai-2005.pdf| Fiber Tract-Oriented Statistics for Quantitative Diffusion Tensor MRI Analysis.]] Proc. MICCAI, Oct 26-29 2005; LNCS 3749, pp. 131-139

Revision as of 17:54, 3 April 2007

Home < Algorithm:UNC:DTI

Quantitative Tract Analysis

This project proposes a framework for quantitative analysis of DTI data. The framework uses the full tensor information for statistical analysis using the affine-invariant Riemannian metric for defining operations such as interpolation and averaging on tensors. Furtheremore, the results of tractography are used to provide a reference coordinate system the respresents the underlying structure of fiber bundles. The tract modeling framework includes a model both of the geometry of the fiber bundle and of the diffusion properties along the bundle. A new anisotropy measure called geodesic anisotropy (GA) is also included in the framework.

Fiber tracts with colored FA attributes

Corouge-tract-analysis-flowchart.jpg

Population Analysis

Our methodology for population analysis of DT-MRI is based on unbiased non-rigid registration of a population to a common coordinate system. The registration jointly produces an average DTI atlas, which is unbiased with respect to the choice of a template image, along with diffeomorphic correspondence between each image. The registration image match metric uses a feature detector for thin fiber structures of white matter, and interpolation and averaging of diffusion tensors use the Riemannian symmetric space framework. The anatomically significant correspondence provides a basis for comparison of tensor features and fiber tract geometry in clinical studies.

Goodlett dti atlas flowchart.png

Tensors in Splenium
Tractography performed in atlas image

Our registration procedure is based on a scalar feature image which is sensitive to sheet like structures. We have observed that the major fiber bundles of interest occur as sheet or tube like manifolds in the FA image of the brain. As a feature image we use the maximum eigenvalue of the hessian of the FA image. Images are initially aligned using an affine registration and then deformed to a common coordinate system using the unbiased atlas-building procedure of Joshi et al. [1]. The deformation fields produced by the registration process are applied to the tensors fields using appropriate methods for reorienting and interpolating tensors. The transformed images are averaged in the atlas space to produce a DTI atlas.

An initial test was performed by using the procedure on a set of images of healthy subject at age one year. The results of the tensor averaging are shown on the right. Tractography was also performed on the mean atlas image as shown.

Noise Statistics

Clinical time limitations on the acquisition of diffusion weighted volumes in DTI present several key challenges for quantiative statistics of diffusion tensors and tensor-derived measures. First, the signal to noise ratio (SNR) in each individual diffusion weighted volume is relatively low due to the need for quick acquisition. Secondly, the presence of Rician noise in MR imaging can introduce bias in the estimation of anisotropy and trace. Unlike structural MRI where intensities are primarily used to obtain contrast, the goal of DTI is to quantify the local diffusion properties in each voxel. Therefore, an understanding of the influence of imaging noise on the distribution of measured values is important to understand the results of statistical analysis and to design new imaging protocols.

Publications

  • Corouge I, Fletcher PT, Joshi S, Gouttard S, Gerig G, Fiber Tract-Oriented Statistics for Quantitative Diffusion Tensor MRI Analysis. Medical Image Analysis 10 (2006), 786 - 798 PDF
  • Goodlett C, Corouge I, Jomier M, Gerig G. A Quantitative DTI Fiber Tract Analysis Suite. Insight Journal, 2005.
  • Corouge I, Fletcher PT, Joshi S, Gilmore JH, Gerig G. Fiber Tract-Oriented Statistics for Quantitative Diffusion Tensor MRI Analysis. Proc. MICCAI, Oct 26-29 2005; LNCS 3749, pp. 131-139
  • Goodlett C, Davis B, Jean R, Gilmore J, Gerig G. Improved Correspondence for DTI Population Studies via Unbiased Atlas Building. MICCAI, 2006.
  • Goodlett C, Fletcher P T, Lin W, and Gerig G. Noise-induced bias in low-direction diffusion tensor MRI: Replication of Monte-Carlo simulation with in-vivo scans. Accepted ISMRM 2007.

Software

  • Algorithms written in ITK. GUI of prototype software written in QT (FiberViewer software). Prototype software tested in clinical studies at UNC. Validation tests with repeated DTI of same subject (6 cases). FiberTracking download
  • Additionally available: ITK compatible fibertracking prototype tool FiberTracking to be used to study overlap/dissimilarity with other tools already available to NA-MIC: Functionality: reads raw MRI-DT data (6 direction Basser scheme), fiber tracking based on user-selected source and regions (S. Mori scheme), display of fibertracts and volumetric data, output: sets of streamlines in ITK polyline format attributedwith DTI properties and display parameteres (radiusof tubes, local color, etc.). FiberViewer download