View source for Build Slicer3 on Dell Laptop Inspiron 1501 (Fedora Core 6)

If Fedora Core 6 has been installed on Dell Laptop Inspiron 1501, follow these steps to build Slicer3 on it:

== Install Tcl/Tk ==

* Download free Tcl/Tk binary for linux from here:
http://downloads.activestate.com/ActiveTcl/Linux/8.4.14/ActiveTcl8.4.14.0.272572-linux-ix86.tar.gz
--[[User:Noby|Noby]] 23:10, 3 January 2007 (EST)This link doesn't work.

* Login as root and install Tcl/Tk

== Get Slicer3 source code ==

  svn co http://www.na-mic.org/svn/Slicer3/trunk Slicer3

== [Optional] Include opentracker in Slicer3 (e.g. for IGT Demo module) ==

With SPLOT built, locate the OpenTracker section in Slicer3/CMakeLists.txt and perform the following changes:

* Change this line
  OPTION(USE_OPENTRACKER "Need OpenTr acker lib to build IGT Demo module." '''OFF''')
to
  OPTION(USE_OPENTRACKER "Need OpenTracker lib to build IGT Demo module." '''ON''')

* Find this part
  FIND_LIBRARY(OPENTRACKER_LIB 
               NAMES opentrackerd opentracker
               PATHS ""
               )
then change it to
  FIND_LIBRARY(OPENTRACKER_LIB 
               NAMES opentrackerd opentracker
               PATHS "The directory contains the opentracker lib" # e.g. /home/surg/projects/splot-build/opentracker/lib
               )

* Find this part
  FIND_PATH(OPENTRACKER_INC_DIR "OpenTracker/OpenTracker.h"
           "" 
           )
then change it to 
  FIND_PATH(OPENTRACKER_INC_DIR "OpenTracker/OpenTracker.h" 
           "The opentracker include directory" # e.g. /home/surg/projects/splot-build/opentracker/include
           )

== Build Slicer3 ==

  ./Slicer3/Scripts/getbuildtest.tcl

== Run Slicer3 ==

  ./Slicer3-build/bin/Slicer3