OpenIGTLink
Open IGT Link is a simple network protocol intended for trackers, robots and other devices to send data to the main application. Some devices might accept commands.
- Optotrack
- MRI real time image
- JHU robots
(Please contact us if you would like to include other devices.)
License: new BSD license ©2008 Insight Software Consortium
People / Organizations
- Luis Ibanez, Kitware
- Junichi Tokuda, BWH
- Csaba Csoma, JHU
- Jack Blevins, Acousticmed
- Patrick Cheng, Georgetown University
- Haying Liu, BWH
- Insight Software Consortium
- National Alliance for Medical Image Computing (NA-MIC)
Protocol
Header Structure
Bytes 0 2 14 34 42 50 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+--+-+-+..... | V | TYPE | DEVICE_NAME | BODY_SIZE | CRC64 | BODY +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+--+-+-+.....
Byte Order
Big endian should be used for all numerical values (version, body size, crc). Unused spaces are padded with 0 (binary).
Header Fields
| Data | Type | Description |
| V | Unsigned short (16bit) | Version number (1) |
| TYPE | char[8] | Type name of data |
| DEVICE_NAME | char[20] | Unique device name |
| BODY_SIZE | 64 bit unsigned int | Size of body in bytes |
| CRC | 64 bit unsigned int | 64 bit CRC for body data |
Data types
IMAGE
Image data consists of ascii header information followed by binary image pixel data. (Ascii header is used to maintain compatibility with SlicerDaemon connection)
space right-anterior-superior\n dimensions <xsize> <ysize> <zsize>\n space_origin (<x>, <y>, <z>)\n space_directions (<tx>, <ty>, <tz>) (<sx>, <sy>, <sz>) (<nx>, <ny>, <nz>) \n kinds space space space\n components 1\n scalar_type <scalar type #>\n <binary image data>
Descriptions:
| Data | Type | Description |
| <xsize>, <ysize>, <zsize> | text number (real) | Center position of the image in RAS coordinate |
| <tx>, <ty>, <tz> | text number (real) | Transverse vector (direction for 'i' index) / The length represents pixel size in 'i' direction |
| <sx>, <sy>, <sz> | text number (real) | Transverse vector (direction for 'j' index) / The length represents pixel size in 'j' direction |
| <nx>, <ny>, <nz> | text number (real) | Normal vector of image plane(direction for 'k' index) / The length represents pixel size in 'z' direction or slice thickness |
| <scalar type #> | Pixel scalar type number (Ascii) | 2:int8 3:int8 4:int16 5:uint16 6:int32 7:uint32 10:float32 11:float64 |
| <binary image data> | Binary image data (<xsize>*<ysize>*<zsize>* (pixel size) | Image data |
TRANSFORM
Bytes (Body) 50 54 58 62 66 70 74 78 82 86 90 94 98 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | M0,0) | (1,0) | (2,0) | (0,1) | (1,1) | (2,1) | (0,2) | (1,2) | (2,2) | (0,3) | (1,3) | (2,3) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
POSITION
STATUS
Bytes (Body) 50 52 60 80 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+--+-+-+..... | C | Sub Code | Status name | Status message (optional) +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+--+-+-+.....
| Data | Type | Description |
| C | Unsigned short (16bit) | Status code groups: 1-Ok, 2-Generic Error, ... (see below) |
| Sub Code | 64 bit integer | Sub code for the error (ex. 0x200 - file not found) |
| Error name | char[20] | "Error", "Ok", "Starting up" - can be anything, don't relay on this |
| Status Message (optional) | char[ BodySize - 30 ] | Optional (English) description (ex. "File C:\test.ini not found") |
Status codes:
0 No Errors Found (use status 1 instead!)
1 OK (Default status)
2 Unknown error
3 Panic mode (emergency)
4 Not found (file, configuration, device etc)
5 Access denied
6 Busy
7 Time out / Connection lost
8 Overflow / Can't be reached
9 Checksum error
10 Configuration error
11 Not enough resource (memory, storage etc)
12 Illegal/Unknown instruction (or feature not implemented)
13 Device not ready (starting up)
14 Manual mode (device does not accept commands)
15 Device disabled
16 Device not present
17 Device version not known
18 Hardware failure
19 Exiting / shut down in progress
