IGT:ToolKit/Build-Tracker-Simulator
From NAMIC Wiki
Home < IGT:ToolKit < Build-Tracker-Simulator
Back to IGT:ToolKit
Notes before you begin
- Slicer3 is assumed to have been built on your computer in the directory igt-tutorial
- CMake 2.6 is absolutely required. If you don't have it installed, you can use the version of ccmake found in igt-tutorial/Slicer3-lib/CMake-build/bin (it will be CMake 2.6)
Instructions
First, get the tracker simulator source code from the repository:
$ cd igt-tutorial $ svn co http://www.na-mic.org/svn/NAMICSandBox/trunk/BRPTools/ScannerIO ScannerIO
Configure using CMake 2.6: You should not need to change any settings - just press the 'c' key followed by the 'g' key to generate the makefiles.
Windows
- Open ScannerIO.sln in the ScannerIO folder
- Build -> Build Solution
- Copy ScannerIOLib.dll from the ScannerIO/Debug folder to the ScannerIO/bin/Debug folder
- Make sure the Windows firewall is off
Upon completion, you will find TrackerSim.exe in ScannerIO/bin/Debug
Linux / Mac OS X
$ cd ScannerIO $ ccmake .
If the previous command has completed without error, you can start building:
$ make
Upon completion, you should find the TrackerSim executable file in ScannerIO/bin