Difference between revisions of "U-Tokyo-visit-03192010"

From NAMIC Wiki
Jump to: navigation, search
Line 16: Line 16:
 
* Talk title: Machining process incorporating biomaterials effective for bone regeneration in arthroplasty
 
* Talk title: Machining process incorporating biomaterials effective for bone regeneration in arthroplasty
 
* [Abstract] The goal is to develop a machining process incorporating biomaterials effective for bone regeneration in arthroplasty. Temperature, mechanical stress, and form are critical parameters in regeneration of living tissues such as bone. The following investigations are under this theme: (1) investigation of the influence of cutting temperature and load on bone regeneration by the machining process, (2) development of a low power nanoscale machining process and tools, (3) investigation of effective cut shapes for bone regeneration, and (4) development of a biologically compatible machining system as a cutting tool.
 
* [Abstract] The goal is to develop a machining process incorporating biomaterials effective for bone regeneration in arthroplasty. Temperature, mechanical stress, and form are critical parameters in regeneration of living tissues such as bone. The following investigations are under this theme: (1) investigation of the influence of cutting temperature and load on bone regeneration by the machining process, (2) development of a low power nanoscale machining process and tools, (3) investigation of effective cut shapes for bone regeneration, and (4) development of a biologically compatible machining system as a cutting tool.
;; * [[Media:sugita-utokyo-ws.zip | Slide with the movies]]
+
* [[Media:sugita-utokyo-ws.zip | Slide with the movies]]
 
*[http://www.nml.t.u-tokyo.ac.jp/en/index-e.html Speaker Bio]
 
*[http://www.nml.t.u-tokyo.ac.jp/en/index-e.html Speaker Bio]
  
Line 27: Line 27:
 
* Talk title: Three-dimensional shape measurement endoscope
 
* Talk title: Three-dimensional shape measurement endoscope
 
*[Abstract] A three-dimensional shape measurement endoscope based on single-view imaging will be introduced in my talk. We propose a novel method integrating shape from focus and shading methods. Our prototype provides surfaces of organ's inner walls within 0.5 mm of error and no lack of the surface in the experiments.
 
*[Abstract] A three-dimensional shape measurement endoscope based on single-view imaging will be introduced in my talk. We propose a novel method integrating shape from focus and shading methods. Our prototype provides surfaces of organ's inner walls within 0.5 mm of error and no lack of the surface in the experiments.
;; * [[Media:nakajima-utokyo-ws.zip | Slide with the movies]]
+
* [[Media:nakajima-utokyo-ws.zip | Slide with the movies]]
 
*[http://www.iml.u-tokyo.ac.jp/nl/index_e.html Speaker Bio]
 
*[http://www.iml.u-tokyo.ac.jp/nl/index_e.html Speaker Bio]
  

Revision as of 09:31, 20 March 2010

Home < U-Tokyo-visit-03192010

Univ Tokyo/NCIGT joint workshop on Image Guided Therapy

Date/Time

9am-3pm, March 19, 2010

Objective

The objective of this workshop is discuss the mutual interest between the delegates from the University of Tokyo and NCIGT particular in Image Guided Therapy research.

Faculty talks

  • at Abraham Conference Room, L1, BWH

9:30-10:15am: Welcome/Introduction, Nobuhiko Hata, PhD

10:15-11:00 Naohiko Sugita, PhD, the University of Tokyo

  • Talk title: Machining process incorporating biomaterials effective for bone regeneration in arthroplasty
  • [Abstract] The goal is to develop a machining process incorporating biomaterials effective for bone regeneration in arthroplasty. Temperature, mechanical stress, and form are critical parameters in regeneration of living tissues such as bone. The following investigations are under this theme: (1) investigation of the influence of cutting temperature and load on bone regeneration by the machining process, (2) development of a low power nanoscale machining process and tools, (3) investigation of effective cut shapes for bone regeneration, and (4) development of a biologically compatible machining system as a cutting tool.
  • Slide with the movies
  • Speaker Bio

11:00- 11:30 Ron Kikinis, MD, BWH

  • Talk title: 3D Slicer as a Research Platform for Medical Image Computing
  • Slide
  • Speaker Bio

11:30-12:15 Yoshikazu Nakajima, PhD, the University of Tokyo

  • Talk title: Three-dimensional shape measurement endoscope
  • [Abstract] A three-dimensional shape measurement endoscope based on single-view imaging will be introduced in my talk. We propose a novel method integrating shape from focus and shading methods. Our prototype provides surfaces of organ's inner walls within 0.5 mm of error and no lack of the surface in the experiments.
  • Slide with the movies
  • Speaker Bio

Student / Fellow seminars

Organized by Haytham Elhawary (BWH), TBD (Tokyo U)

13:45-16:00pm

Held at Room 4-002G, Ledge Building

Talk format: 12 min talk/3 min questions

Moderator: Joonho SEO, the University of Tokyo

13:45 - 14:00: Joonho SEO - Visual servoing system for non-invasive medical treatment using HIFU

  • Visual servoing system for non-invasive medical treatment using high intensity focused ultrasound (HIFU). We aim to develop a medical treatment system for renal diseases such as renal calculi and renal cell carcinoma with HIFU's two well-known mechanism, cavitations and heat generation. Clinical use of HIFU system for renal diseases is immature because kidney is one of the moving organs by respirations, manual irradiation of HIFU focus into target in the body can cause a serious safety problem. Here, our research proposes a point/volumetric target tracking system based on ultrasound imaging. Specifically, we estimate the position of HIFU irradiations by registration of bi-plane ultrasound image and preoperative three-dimensional kidney model. The experiment is now conducted with phantom kidney model.
  • Slide with the movies

14:00 - 14:15: Sota Oguro (Post-doctoral fellow, SNR (Hata) lab, BWH) - Non-rigid Registration of Pre-procedural MR Images and Intra-procedural CT Images for CT-guided Percutaneous Cryoablation of Renal Tumors

14:15 - 14:30: Young Min BAEK - A surgical robot universally designed for several surgeries

  • My research goal is to develop a surgical robot which can deal with variety of surgical operations. The problem of Computer Aided Surgery (CAS) is its high-cost which make it hard to be conducted in wide areas. Also, a burden of patients has become larger to get a benefit from CAS. General-purposed surgical robot faces to mainly two problems; 1) Mechanical Linkage, 2) Modular structure. To solve these problems, we've developed the surgical robot with easily changeable structure. Master and slave structure is employed with real-time operating systems as well. So far, experiments are conducted in two fields such as neurosurgery and eye surgery. We expect applications can be expanded to other fields in near future.
  • Slide with the movies

14:30 - 14:45: Jayender Jagadeesan (Post-doctoral fellow, SNR (Hata) lab, BWH) - Image Guided Flexible Instrument Manipulation

14:45 - 15:00: Toshiyuki OYAMA - Numerical study of bubble motion in liquid

  • My topic is a numerical study of bubble motion in liquid. The key of CFD simulation including bubbles is to capture interfaces of bubbles. By front-tracking method, that tracks explicitly positions of interfaces, bubble motion in liquid has been understood for these 15 years. Bubbles of 1 mm diameter rising in water bounce on a free surface between air and water. Applications of bubble motion are not only power plants or mixing towers but also medical treatment in vessels. Bubbles in vessels react on ultra sound. As a result, bubbles oscillate, produce heat and collapse stone in tissue or burn tumor. In my presentation I will speak mainly about bubble bouncing, this is my theme, but also introduce heating vessels with micro bubble and focused ultra sound.
  • Slide with the movies

15:00 - 15:15: Panagiotis Vartholomeos (Post-doctoral fellow, SNR (Hata) lab, BWH) - Magnetic Guidance for Targeted Drug Delivery : Goal, Challenges and Clinical Applications

15:15 - 15:30: Toki SAITO - Deformable-model-based 2-D/3-D registration for fracture surgeries

  • My research topic is computer aided surgery. Especially, I focus on reconstruction of 3D shape and position estimation from 2D X-ray images. Its final goal is to reconstruct real-time computer tomography imaging using X-ray images, and it provides accurate and safe surgery. As a first step, we proposed an estimation method of fractured bone position and shape using statistical deformable models and X-ray images in a CT-less environment, and it provides fracture reduction path automatically and reduces surgeons' burden. In my presentation, I'll talk about it.
  • Slide with the movies

15:30 - 15:45: Haiying Liu (Engineer for Image Guided Therapy, SNR (Hata) lab, BWH) - IGT Applications at BWH

15:45 - 16:00: Haytham Elhawary (Post-doctoral fellow, SNR (Hata) lab, BWH) - Intraoperative Visualization of White Matter Tracts During Brain Tumor Resection

16:00 - 16:30 NCIGT tour/ Adjourn

Confirmed Assistance

Haytham Elhawary, Noby Hata, Jayender Jagadeesan, Haiying Liu, Panagiotis Vartholomeos, Sota Oguro